Ring Wired Doorbell Pro (2nd Gen) Oversized Spacer Mount — 4” / 4.5” / 5” Depth Options

Overview

Create maximum clearance for recessed installs and tight entryways. This oversized spacer mount by Hidden River Lab is designed for the Ring Wired Doorbell Pro (2nd Gen) (legacy name: Ring Doorbell Pro 2) model 5AT2S2. It extends the doorbell outward to help eliminate side obstacles and improve the usable field of view — especially helpful for better visibility at night when the camera is not blocked by brick returns or trim.

0° straight view keeps the camera framing natural.

Compatibility

✔︎ Designed for:

• Ring Wired Doorbell Pro (2nd Gen) (legacy name: Ring Doorbell Pro 2)

• Model reference: 5AT2S2

✔︎ Depth options (by variant): 4” / 4.5” / 5”

✔︎ Angle: 0° straight view (no horizontal side angle, no vertical tilt)

✔︎ Orientation: Can be mounted on either side of the door (left/right)

✖︎ Not compatible with:

• Ring Wired Doorbell Plus (1st Gen) (legacy name: Ring Doorbell Pro)

• Newest Ring Retinal 4K wired models

• Any Ring battery models

• Any other Ring models not listed above

Not sure which model you have? Send us a photo of your doorbell and mounting area — we’ll confirm fitment.

What’s Included

▪︎ 1 × Oversized spacer mount (choose depth variant: 4” / 4.5” / 5”)

▪︎ Optional side support screw hole (built-in) — can be used to secure the spacer to a side wall when your installation allows it

▪︎ All required mounting screws (included)

✖︎ Doorbell is not included. Photos may show example setups for illustration.

Fit & Measurements

▪︎ Depth options: 4” / 4.5” / 5” (select your variant)

▪︎ Designed to extend the doorbell outward to clear deep recesses and side obstacles

▪︎ Optional side support helps stabilize the mount when the spacer sits close to a side wall

→ Please measure your recess depth and the side clearance you need before ordering. If you want, send photos/measurements and we’ll help you choose the best depth.

Why You’d Use This Spacer

▪︎ Maximum clearance: Built for deep recesses where standard spacers aren’t enough

▪︎ Eliminates side obstacles: Helps prevent brick/trim from blocking the camera view

▪︎ Improves night visibility: Reduces IR glare and shadowing caused by nearby walls (when the view is less obstructed)

▪︎ Optional side support: Adds stability for tight side-wall installs

Installation Notes

Basic tools required (e.g., screwdriver).

▪︎ Select the depth that provides the clearance you need (4”, 4.5”, or 5”).

▪︎ If needed, install the optional side support to stabilize the spacer against a nearby side wall.

▪︎ Install using the included screws (anchors may be needed depending on surface).

▪︎ Weather-seal as appropriate for your environment.

▪︎ Mount the doorbell per Ring’s instructions.

If you’re unsure about fitment or which depth to choose, message us with photos — we’ll help quickly.

Materials & Finish

♺ 3D-printed durable plastic for everyday outdoor use.

▪︎ New condition. Minor internal artifacts may be visible due to additive manufacturing (3D printing). External faces are designed to present cleanly once installed.

Color & Image Note

Actual color may vary slightly due to lighting and display calibration. Photos may show example setups; Ring components shown are not included unless stated above.

Brand & Affiliation Disclaimer

This is an aftermarket product made by Hidden River Lab. It is not affiliated with, sponsored by, or endorsed by Ring. Ring® is a trademark of its respective owner. Brand names are used solely to indicate compatibility.

Intellectual Property Notice

The design, images, and listing text are intellectual property of Hidden River Lab. Purchase does not grant any license to copy, reproduce, manufacture, reverse-engineer, or commercially exploit the design in whole or in part.

Support

Not sure if you have the Ring Wired Doorbell Pro (2nd Gen) (model 5AT2S2) or which oversized depth you need? Message us with photos and measurements — we’ll confirm fitment and help you choose the right variant.