Custom-Depth Spacer Mount for Ring Wired Doorbell Plus (1st Gen) (Ring Doorbell Pro) – 0.5” to 3”

Overview

Create the clearance you need for a cleaner install and a better camera view. This custom-depth spacer mount by Hidden River Lab is designed for the Ring Wired Doorbell Plus (1st Gen) (formerly known as the Ring Doorbell Pro). It’s ideal for recessed mounting surfaces or installs where brick/trim/side obstacles block the camera view.

0° straight view keeps framing natural (no side angle, no vertical tilt).

Compatibility

✔︎ Designed for: Ring Wired Doorbell Plus (1st Gen) (formerly “Ring Doorbell Pro”)

✔︎ Angle: 0° straight view

✔︎ Orientation: Can be mounted on either side of the door (left/right)

✖︎ Not compatible with:

• Ring Wired Doorbell Pro (2nd Gen) (formerly “Ring Doorbell Pro 2”)

• Newest Retinal 4K wired models

• Any Ring battery models

• Any other Ring models not listed above

Not sure which model you have? Send us a photo of your doorbell and mounting area — we’ll confirm fitment.

What’s Included

▪︎ 1 × Custom-depth straight spacer mount (choose depth: 0.5” to 3”)

▪︎ All required mounting screws (included)

✖︎ Doorbell is not included. Photos may show example setups for illustration.

Fit & Measurements

▪︎ Custom depth range: 0.5” to 3”

▪︎ Purpose: Adds stand-off distance to clear trim/brick returns and reduce side obstruction

▪︎ Planning tip: The doorbell itself adds thickness to the total assembly (approximately 3/4”).

Example: If you need ~2.75” total clearance from the wall to make the install flush with an edge/obstacle, a ~2.0” spacer may be appropriate (because the doorbell contributes the remaining depth). (Use photos as reference.)

If you want, message us a photo and the clearance you need — we’ll recommend a good depth.

Why You’d Use This Spacer Mount

▪︎ Clears side obstructions: Helps reduce blockage from brick, trim, recessed surfaces, or narrow entryways

▪︎ Improves camera view: Moves the doorbell outward for a wider usable field of view

▪︎ Clean, straight framing: 0° view with no wedge or corner angle

▪︎ Custom depth options: Choose the stand-off that matches your install

Installation Notes

Basic tools required (e.g., screwdriver).

▪︎ Select the depth that provides the clearance you need.

▪︎ Install the spacer mount using the included screws (anchors may be needed depending on your surface).

▪︎ Mount the doorbell per Ring’s instructions and weather-seal as appropriate for your environment.

For non-standard installs or if you’re unsure on depth, message us with photos and measurements — we’ll help quickly.

Materials & Finish

♺ 3D-printed durable plastic for everyday outdoor use.

▪︎ New condition. Minor internal artifacts may be visible due to additive manufacturing (3D printing). External faces are designed to present cleanly once installed.

Color & Image Note

Actual color may vary slightly due to lighting and display calibration. Photos may show example setups; Ring components shown are not included unless stated above.

Brand & Affiliation Disclaimer

This is an aftermarket product made by Hidden River Lab. It is not affiliated with, sponsored by, or endorsed by Ring. Ring® is a trademark of its respective owner. Brand names are used solely to indicate compatibility.

Intellectual Property Notice

The design, images, and listing text are intellectual property of Hidden River Lab. Purchase does not grant any license to copy, reproduce, manufacture, reverse-engineer, or commercially exploit the design in whole or in part.

Support

Not sure whether you have Wired Doorbell Plus (1st Gen) vs Wired Doorbell Pro (2nd Gen) or a Retinal 4K model, or unsure which depth you need? Message us with photos and the approximate clearance you’re trying to achieve — we’ll help quickly.