Ring Wired Doorbell Plus (1st Gen) 35° Siding Bracket — 4-inch Dutch Lap Panels (Ring Pro)

Overview

Aim your camera where you need it on Dutch lap siding. This 35° angled Dutch lap siding bracket by Hidden River Lab is designed for the Ring Wired Doorbell Plus (1st Gen) (legacy name: Ring Doorbell Pro) and provides a stable mount on 4-inch Dutch lap panels. The built-in 35° horizontal side angle helps aim the camera toward your entry path when a straight mount would point the view too far to the side.

35° side angle improves framing while keeping a clean, stable install.

Compatibility

✔︎ Designed for:

• Ring Wired Doorbell Plus (1st Gen) (legacy name: Ring Doorbell Pro)

✔︎ Angle: 35° horizontal side angle (no vertical tilt)

✔︎ Siding type: Dutch lap siding panels (4-inch exposure/panel size)

✔︎ Mounting surface: Siding applications where you need a built-in side angle

✖︎ Not compatible with:

• Ring Wired Doorbell Pro (2nd Gen) (legacy name: Ring Doorbell Pro 2)

• Newest Ring Retinal 4K wired models

• Any Ring battery models

• Non-Dutch-lap profiles or panel sizes other than 4-inch

• Any other Ring models not listed above

Not sure which model you have? Send us a photo of your doorbell and siding — we’ll confirm fitment.

What’s Included

▪︎ 1 × 35° angled Dutch lap siding bracket (for 4-inch panels)

▪︎ All required mounting screws (included)

✖︎ Doorbell and OEM backplate are not included. Photos may show example setups for illustration.

Fit & Measurements

▪︎ Designed specifically for 4-inch Dutch lap siding panels (panel exposure/panel size)

▪︎ Built-in 35° side angle to help aim the camera toward your walkway/entry path

→ Please confirm your panel size and exact doorbell model before purchase. If you want, send photos and we’ll help verify.

Why You’d Use This Bracket

▪︎ Better camera aim: 35° side angle helps capture more of your approach instead of looking along the wall

▪︎ Stable on siding: Compensates for Dutch lap shape to reduce rocking and gaps

▪︎ Clean, integrated angle: No separate corner kits needed for this specific setup

▪︎ Model-specific fit: Purpose-built for Wired Doorbell Plus (1st Gen) footprint

Installation Notes

Basic tools required (e.g., screwdriver).

▪︎ Confirm your doorbell model and panel size before installing.

▪︎ Align the bracket to the siding profile and ensure it sits flush and stable.

▪︎ Install using the included screws (anchors may be needed depending on surface).

▪︎ Mount your Ring doorbell per Ring’s instructions and weather-seal as appropriate.

If you’re unsure about fitment or need a different angle, message us with photos — we’ll help quickly.

Materials & Finish

♺ 3D-printed durable plastic for everyday outdoor use.

▪︎ New condition. Minor internal artifacts may be visible due to additive manufacturing (3D printing). External faces are designed to present cleanly once installed.

Color & Image Note

Actual color may vary slightly due to lighting and display calibration. Photos may show example setups; Ring components shown are not included unless stated above.

Brand & Affiliation Disclaimer

This is an aftermarket product made by Hidden River Lab. It is not affiliated with, sponsored by, or endorsed by Ring. Ring® is a trademark of its respective owner. Brand names are used solely to indicate compatibility.

Intellectual Property Notice

The design, images, and listing text are intellectual property of Hidden River Lab. Purchase does not grant any license to copy, reproduce, manufacture, reverse-engineer, or commercially exploit the design in whole or in part.

Support

Not sure if you have the Wired Doorbell Plus (1st Gen) or need a different angle for your layout? Message us with photos of your doorbell and siding — we’ll help confirm fitment and the best option.