Hidden River Lab
6.5" × 4.75" NuTone / M&S Intercom Retrofit Adapter Plate for Ring Solar Charger (6GFYA2)
6.5" × 4.75" NuTone / M&S Intercom Retrofit Adapter Plate for Ring Solar Charger (6GFYA2)
Couldn't load pickup availability
Overview
Upgrade an existing intercom installation with a modern Ring solar-powered video doorbell setup while covering the original wall opening. This 6.5" × 4.75" NuTone / M&S Intercom Retrofit Adapter Plate by Hidden River Lab is designed specifically for the Ring Solar Charger for Battery Doorbells, Model 6GFYA2.
Designed for many older NuTone / M&S (Music & Sound) intercom door stations and similar-size openings, the adapter helps cover the oversized cutout left after removing a legacy intercom. It creates a purpose-built mounting surface for the compatible Ring Solar Charger without requiring the original opening to match the smaller mounting footprint of the Ring accessory.
The one-piece mounting plate features two centrally positioned vertical mounting slots. These slots accommodate a range of approximately 3.75" to 5.75" between mounting screw centers, allowing flexibility when attaching the adapter to compatible existing intercom boxes or mounting points.
Once the HRL plate is secured, the Ring Solar Charger (6GFYA2) attaches to the adapter using the two included charger-mounting screws. The result is a clean retrofit installation that helps conceal old wall openings, mounting holes, and surrounding cosmetic imperfections.
Supports the latest Ring Battery Doorbells: When paired with the compatible OEM Ring Solar Charger, the installation supports Ring Battery Doorbell 2K, Battery Doorbell 2K Plus, and Battery Doorbell 4K Pro. Compatibility with these doorbells is provided by the Ring Solar Charger itself; the Hidden River Lab adapter is the mechanical mounting plate for that charger.
Important: This listing is for the Hidden River Lab intercom adapter plate and four mounting screws only. The Ring Solar Charger, Ring video doorbell, and other Ring accessories are NOT included.
Compatibility
✔︎ Designed specifically for:
▪︎ Ring Solar Charger for Battery Doorbells — Model 6GFYA2.
✔︎ Solar Charger application: Mounting the compatible Ring Solar Charger over an existing legacy intercom opening.
✔︎ Retrofit application: Many older NuTone / M&S intercom door stations and similar-size legacy intercom openings.
✔︎ Adapter dimensions: Approximately 6.5" × 4.75".
✔︎ Adjustable mounting screw spacing: Approximately 3.75" to 5.75" between screw centers, using the two vertical mounting slots.
✔︎ Mounting alignment: Two centrally positioned, vertically aligned mounting slots.
✔︎ Mounting surface: Suitable flat surfaces and compatible existing intercom mounting boxes with adequate mechanical support.
✔︎ Construction: Single-piece mounting plate.
✔︎ Charger attachment: Two mounting screws are included for securing the compatible Ring Solar Charger to the adapter.
Ring Solar Charger 6GFYA2 supports the following doorbells:
✔︎ Ring Battery Doorbell 2K — Battery Doorbell (2nd Gen), Model 5DFYA5.
✔︎ Ring Battery Doorbell 2K Plus — Battery Doorbell Plus (2nd Gen), Model 5DCFAB.
✔︎ Ring Battery Doorbell 4K Pro — Battery Doorbell Pro (2nd Gen), Model 5DFYA6.
These doorbells are supported by the OEM Ring Solar Charger (6GFYA2). The Hidden River Lab plate mounts the solar charger and is not intended to serve as a standalone doorbell mounting bracket.
✖︎ Not compatible with:
✖︎ Other Ring Solar Charger generations or models unless specifically confirmed as compatible.
✖︎ Older Ring Solar Chargers designed for different doorbell generations or mounting interfaces.
✖︎ Direct mounting of a Ring video doorbell without the compatible Solar Charger.
✖︎ Ring Solar Panels or other remotely mounted solar accessories with different mounting designs.
✖︎ Intercom mounting boxes with screw spacing outside the supported 3.75" to 5.75" range.
✖︎ Wall openings larger than the adapter's available coverage area.
✖︎ Non-flat mounting surfaces requiring specially shaped siding or brickmold adapters.
✖︎ Unsupported or structurally unsuitable mounting surfaces.
Important — Verify Solar Charger Model 6GFYA2: Ring offers several solar charging accessories for different generations of video doorbells. This adapter is designed specifically for the Ring Solar Charger for Battery Doorbells, Model 6GFYA2. Please verify the exact solar charger model before ordering. Similar-looking solar accessories may use different mounting arrangements.
Intercom fit: NuTone, M&S, and other legacy intercom installations vary in box dimensions, screw positions, and wall-opening sizes. Verify the existing mounting screw spacing and available wall coverage before ordering.
What's Included
▪︎ 1 × 6.5" × 4.75" Intercom Retrofit Adapter Plate — single-piece mounting plate designed for Ring Solar Charger 6GFYA2.
▪︎ 2 × Mounting screws — for attaching the adapter plate to a compatible existing intercom box or suitable mounting surface.
▪︎ 2 × Solar Charger mounting screws — for securing the compatible Ring Solar Charger to the HRL adapter plate.
▪︎ Total included hardware: Four mounting screws.
✖︎ Not included: Ring Solar Charger (6GFYA2), Ring Battery Doorbell, original Ring mounting bracket, legacy intercom box, wall anchors, existing intercom components, or additional installation accessories.
Note: The Ring Solar Charger and video doorbell must be purchased separately. Original Ring mounting components and power connectors required to complete the solar charger installation are supplied with the applicable Ring equipment, not with this Hidden River Lab adapter.
Fit & Measurements
▪︎ Overall adapter size: Approximately 6.5" × 4.75".
▪︎ Adapter construction: One-piece mounting plate.
▪︎ Designed for: Ring Solar Charger for Battery Doorbells, Model 6GFYA2.
▪︎ Mounting slots: Two vertically aligned slots positioned along the centerline of the plate.
▪︎ Minimum supported mounting screw spacing: Approximately 3.75".
▪︎ Maximum supported mounting screw spacing: Approximately 5.75".
▪︎ Mounting adjustment: Screw positions can be selected within the available slot range to match compatible existing intercom mounting points.
▪︎ Central opening: Clearance opening within the adapter plate.
▪︎ Mounting application: Legacy intercom boxes and suitable flat mounting surfaces.
▪︎ Charger installation: The compatible Ring Solar Charger is secured to the adapter with two included screws.
Understanding the 6.5" × 4.75" dimensions:
The 6.5" × 4.75" measurement refers to the Hidden River Lab adapter plate, not the dimensions of the Ring Solar Charger or video doorbell.
The plate is designed to provide additional wall coverage around the mounting location, helping conceal the oversized opening and cosmetic marks left after removing many older NuTone / M&S intercom door stations.
Actual coverage depends on the dimensions and condition of the existing opening. The adapter plate must be securely attached to suitable mounting points or structural backing and is not intended to provide unsupported structural coverage over an excessively large opening.
Understanding the adjustable mounting slots:
Two centrally positioned vertical mounting slots allow the installation screws to be positioned at different heights. The supported distance between mounting screw centers ranges from approximately 3.75" to 5.75".
This design helps accommodate different mounting-hole locations found on compatible legacy intercom boxes and reduces the need to reproduce the original intercom mounting pattern exactly.
Understanding the center opening:
The adapter includes a central clearance opening in the mounting plate. This allows access to the area behind the plate during installation. Existing intercom wiring must be handled safely and must not interfere with the mounting assembly.
→ Measure before ordering: Confirm your existing intercom box dimensions, the distance between mounting screw centers, and the size of the wall opening. The mounting screw spacing must fall within the supported range, and the adapter must provide adequate coverage and secure mounting support.
→ Verify the Solar Charger: This plate is intended for Ring Model 6GFYA2, not every Ring solar charging accessory.
Why Choose This Adapter
▪︎ Legacy intercom retrofit: Repurpose an existing NuTone / M&S intercom location for a compatible Ring Solar Charger installation.
▪︎ 6.5" × 4.75" wall coverage: Helps conceal the old intercom opening, mounting holes, and surrounding cosmetic imperfections.
▪︎ Adjustable mounting slots: Supports approximately 3.75" to 5.75" mounting screw spacing for compatible existing intercom boxes.
▪︎ Centered mounting arrangement: Two vertically aligned slots provide flexible mounting positions along the centerline of the plate.
▪︎ Single-piece construction: Simple mounting plate design without a separate interlocking face plate or multi-part assembly.
▪︎ Purpose-built Solar Charger interface: Designed specifically to support the Ring Solar Charger for Battery Doorbells (6GFYA2).
▪︎ Supports current Ring battery doorbells: The compatible Ring Solar Charger works with Battery Doorbell 2K, 2K Plus, and 4K Pro.
▪︎ Clean finished appearance: Helps create a professional-looking transition from a large legacy intercom opening to a modern Ring installation.
▪︎ Four mounting screws included: Two for attaching the HRL plate and two for securing the compatible Solar Charger.
▪︎ Professional retrofit flexibility: Useful for homeowners, electricians, low-voltage installers, and smart-home integrators working with compatible legacy intercom mounting locations.
Materials & Finish
♺ Made from durable PETG plastic using 3D printing.
▪︎ Designed and manufactured by Hidden River Lab.
▪︎ One-piece mounting plate construction.
▪︎ New condition.
▪︎ Minor marks or layer lines from 3D printing may be visible, particularly on hidden or internal surfaces.
▪︎ Visible surfaces are designed to provide a clean finished appearance once installed.
▪︎ This product is a mechanical mounting accessory. It is not an electrical enclosure, solar panel, battery charger, or waterproof sealing system.
Installation Notes
Basic tools required (e.g., screwdriver). Additional tools may be necessary depending on the mounting surface. Follow Ring's installation instructions for the Solar Charger for Battery Doorbells (6GFYA2) and your specific Ring doorbell model.
▪︎ Step 1 — Verify Solar Charger compatibility. Confirm that your Ring Solar Charger is Model 6GFYA2. This HRL adapter is not intended for other Ring Solar Charger models unless specifically confirmed as compatible.
▪︎ Step 2 — Remove the old intercom. Safely remove the existing NuTone / M&S or similar intercom door station. Disconnect power where applicable and properly isolate unused intercom wiring. Do not connect legacy intercom wiring directly to the Ring Solar Charger.
▪︎ Step 3 — Inspect the mounting location. Check the condition of the existing intercom box, surrounding wall, mounting points, and available structural support. Confirm that the 6.5" × 4.75" adapter will provide adequate coverage of the original opening.
▪︎ Step 4 — Measure the mounting screw spacing. Measure the vertical distance between the existing mounting screw centers. The adapter supports approximately 3.75" to 5.75" spacing through its centrally positioned mounting slots.
▪︎ Step 5 — Position the adapter plate. Center the adapter over the existing intercom opening and align its two vertical mounting slots with the compatible mounting points. Make sure the mounting surface provides adequate mechanical support.
▪︎ Step 6 — Secure the adapter plate. Attach the HRL plate using the two included mounting screws where suitable for the existing intercom box or mounting surface. Verify proper alignment and secure attachment without overtightening the screws.
▪︎ Step 7 — Attach the Ring Solar Charger. Position the compatible Ring Solar Charger (6GFYA2) on the HRL mounting plate and secure it using the two included Solar Charger mounting screws. Follow Ring's instructions for the charger and verify that the assembly is firmly attached.
▪︎ Step 8 — Install the Ring mounting bracket. Attach the original Ring doorbell mounting bracket to the Solar Charger according to Ring's installation instructions, using the appropriate original Ring mounting components.
▪︎ Step 9 — Connect the compatible Ring doorbell. Follow Ring's instructions for the correct solar power connection. Ring Battery Doorbell 2K (5DFYA5) uses the Solar Charger's USB-C connection. Ring Battery Doorbell 2K Plus (5DCFAB) and Battery Doorbell 4K Pro (5DFYA6) use the applicable fork connector connection specified by Ring.
Important — Battery Doorbell 2K: Ring specifies that Battery Doorbell 2K must use the Solar Charger's USB-C connection for solar charging. Do not connect the Solar Charger to the doorbell's AC fork terminals, as doing so may damage the device.
▪︎ Step 10 — Mount the doorbell. Install the compatible Ring Battery Doorbell onto the original Ring mounting bracket and complete the attachment process following Ring's instructions.
▪︎ Step 11 — Verify the installation. Confirm that the HRL adapter, Ring Solar Charger, and Ring doorbell are securely mounted. Check that wiring and connectors are properly positioned and that the Solar Charger receives adequate direct sunlight.
▪︎ Step 12 — Complete setup. Follow Ring's instructions for final doorbell setup, battery charging, and device operation.
Solar charging performance: The Ring Solar Charger requires direct sunlight for effective operation. Install it where surrounding walls, overhangs, vegetation, or other obstacles do not substantially block sunlight. Ring recommends positioning the solar charger toward the south in the Northern Hemisphere or toward the north in the Southern Hemisphere when practical.
Solar charging performance depends on sun exposure, weather, battery condition, doorbell settings, temperature, and device usage. The Hidden River Lab adapter does not generate electricity or increase the Solar Charger's electrical output.
Installation precautions: Use appropriate mechanical support and mounting hardware. Properly isolate unused intercom wiring and weather-seal surrounding wall penetrations as appropriate. Do not obstruct the Solar Charger's solar panels or required mounting features. If existing electrical wiring requires modification or you are unsure about installation safety, consult a qualified professional.
Model Compatibility FAQ
What is this NuTone / M&S intercom adapter designed for?
This 6.5" × 4.75" mounting plate is designed to install the Ring Solar Charger for Battery Doorbells, Model 6GFYA2, over many existing NuTone / M&S legacy intercom openings. It helps conceal the old opening and provides a mounting surface for the compatible Ring Solar Charger.
Does this adapter include the Ring Solar Charger?
No. This product includes one Hidden River Lab mounting plate and four mounting screws. The Ring Solar Charger (6GFYA2) and Ring video doorbell must be purchased separately.
Which Ring Battery Doorbells work with Solar Charger 6GFYA2?
Ring specifies compatibility with Battery Doorbell 2K (5DFYA5), Battery Doorbell 2K Plus (5DCFAB), and Battery Doorbell 4K Pro (5DFYA6). These doorbells connect to the OEM Ring Solar Charger, which is mounted using the Hidden River Lab adapter plate.
Will this adapter fit my old NuTone or M&S intercom box?
The adapter is designed for many legacy NuTone / M&S installations. It measures approximately 6.5" × 4.75" and provides vertically adjustable mounting screw positions ranging from approximately 3.75" to 5.75". Confirm your existing opening dimensions, screw spacing, and mounting support before ordering.
What is the distance between the mounting screw holes?
The two vertical mounting slots allow a screw-center spacing of approximately 3.75" to 5.75". This adjustment helps accommodate compatible mounting-hole locations on different legacy intercom boxes.
Can I mount a Ring Battery Doorbell directly onto this plate?
No. This HRL plate is designed to support the Ring Solar Charger (6GFYA2). The compatible Ring Battery Doorbell is installed using the original Ring mounting assembly associated with the Solar Charger.
Does this adapter fit older Ring Solar Charger models?
This mounting plate is designed specifically for Ring Solar Charger Model 6GFYA2. Other Ring Solar Charger generations may have different mounting interfaces and are not confirmed as compatible.
Does the mounting plate improve solar charging performance?
The Hidden River Lab plate provides mechanical mounting support only. It does not increase solar panel output or battery capacity. Charging performance depends on the original Ring Solar Charger, direct sunlight, weather, doorbell usage, and battery conditions.
Can I reuse my old intercom wiring to power the Solar Charger?
No direct connection to legacy intercom wiring is required for this mounting plate or for the Solar Charger's normal solar operation. Existing intercom wiring should be safely disconnected or isolated as appropriate. Follow Ring's instructions for any supported electrical connections.
Color & Image Note
Actual product color may vary slightly due to lighting, photography, and screen calibration. Images may show the Ring Solar Charger, Ring battery video doorbells, legacy intercom components, mounting boxes, or example installations for illustration purposes. These components are not included unless explicitly stated above.
Disclaimers & Policies
Brand & Affiliation Disclaimer
This is an aftermarket intercom retrofit mounting adapter manufactured by Hidden River Lab. Hidden River Lab is not affiliated with, sponsored by, or endorsed by Ring, NuTone, or M&S. Ring®, NuTone®, and M&S® are trademarks of their respective owners. Brand names are used solely to identify product compatibility and intended retrofit applications.
Liability Disclaimer
Installation and use of this product are the purchaser's responsibility. To the extent permitted by applicable law, Hidden River Lab is not liable for damage to devices, wiring, mounting surfaces, exterior finishes, or property; loss of functionality; or personal injury resulting from improper installation, misuse, unauthorized modification, inadequate sealing, or unsuitable environmental conditions. If unsure about installation, consult a qualified professional. Nothing in this notice limits rights or remedies that cannot legally be excluded.
Intellectual Property Notice
The product design, images, text, and related listing content are intellectual property of Hidden River Lab. Purchasing this item does not grant any license to copy, reproduce, manufacture, reverse-engineer, or commercially exploit the design in whole or in part.
Support
Not sure whether your existing NuTone / M&S intercom box is compatible with this 6.5" × 4.75" adapter plate or whether you have the correct Ring Solar Charger (6GFYA2)? Send us photos of your existing intercom opening, mounting-hole spacing, and Ring Solar Charger model number. We'll help verify the mounting requirements before ordering.
Share
