Hidden River Lab
6.5" × 4.75" NuTone / M&S Intercom Retrofit Adapter for Ring Solar Charger (2nd Gen) 5F83E9 - Fork Connector
6.5" × 4.75" NuTone / M&S Intercom Retrofit Adapter for Ring Solar Charger (2nd Gen) 5F83E9 - Fork Connector
Couldn't load pickup availability
Overview
Replace a legacy intercom door station with a compatible Ring solar-powered video doorbell installation while covering the original wall opening. This 6.5" × 4.75" NuTone / M&S Intercom Retrofit Adapter Plate by Hidden River Lab is designed specifically for the Ring Solar Charger (2nd Generation), Model 5F83E9, featuring a fork-style power connector.
Designed for many older NuTone / M&S (Music & Sound) intercom door stations and similar-size openings, the adapter provides a purpose-built mounting surface for the compatible Ring Solar Charger. Its larger plate helps conceal the oversized cutout, old mounting holes, and minor wall imperfections left after removing a legacy intercom.
The one-piece mounting plate features adjustable mounting slots supporting approximately 4" to 5.25" between mounting screw centers. This allows the adapter to accommodate a range of compatible existing intercom mounting boxes and screw locations while providing a clean mounting surface for the Ring Solar Charger.
The HRL plate is secured to the existing mounting location using the two included mounting screws. The compatible Ring Solar Charger is then attached to the plate using the original mounting screws supplied with the Ring accessory.
Designed for multiple Ring battery doorbells: Ring Solar Charger (2nd Gen) with a fork connector is intended for compatible Ring Video Doorbell 3, Video Doorbell 3 Plus, Video Doorbell 4, and the original Battery Doorbell Plus. Ring's dedicated Solar Charger product specifications also list the original Battery Doorbell Pro. The Solar Charger must be compatible with your exact doorbell model.
Important distinction: This Hidden River Lab adapter mounts the Ring Solar Charger (5F83E9), not the doorbell directly. The compatible Ring doorbell is installed using the original Ring Solar Charger mounting assembly and the appropriate Ring-specified electrical connection.
Important — Adapter Only: This listing includes one Hidden River Lab mounting plate and two mounting screws only. The Ring Solar Charger, Ring video doorbell, original Ring attachment hardware, and other Ring accessories are NOT included.
Compatibility
✔︎ Designed specifically for:
▪︎ Ring Solar Charger (2nd Generation) — fork-connector version, Model 5F83E9.
✔︎ Retrofit application: Many legacy NuTone / M&S intercom door stations and similar-size wall openings.
✔︎ Adapter dimensions: Approximately 6.5" × 4.75".
✔︎ Mounting screw spacing: Approximately 4" to 5.25" between screw centers.
✔︎ Mounting adjustment: Two vertically aligned mounting slots.
✔︎ Mounting application: Compatible NuTone / M&S intercom mounting boxes and suitable flat surfaces with adequate mechanical support.
✔︎ Solar Charger attachment: Designed to accommodate the original mounting interface of Ring Solar Charger 5F83E9.
✔︎ Construction: Single-piece mounting plate.
✔︎ Installation purpose: Mechanical mounting support and coverage of legacy intercom wall openings.
Ring doorbells supported through the compatible OEM Solar Charger:
✔︎ Ring Video Doorbell 3.
✔︎ Ring Video Doorbell 3 Plus.
✔︎ Ring Video Doorbell 4.
✔︎ Ring Battery Doorbell Plus — original generation, not Battery Doorbell 2K Plus (2nd Gen).
✔︎ Ring Battery Doorbell Pro — original generation, as identified in Ring's dedicated Solar Charger (2nd Gen) product specifications; verify the exact doorbell and charger combination before installation.
These doorbells connect to the OEM Ring Solar Charger, which is mounted to the Hidden River Lab adapter plate. The HRL adapter does not directly connect to, power, or charge the doorbell.
✖︎ Not compatible with:
✖︎ Ring Solar Charger 5AT3S7 — the Micro-USB version for Ring Video Doorbell (2nd Generation, 2020 release).
✖︎ Ring Solar Charger 6A32F2 — the USB-C version for Ring Battery Doorbell (2024 release).
✖︎ Ring Solar Charger 6GFYA2 — a different generation intended for newer Ring Battery Doorbell models.
✖︎ Other Ring Solar Charger models with different mounting interfaces unless specifically confirmed as compatible.
✖︎ Direct mounting of a Ring video doorbell without the compatible Solar Charger.
✖︎ Ring Solar Panels and other remotely mounted solar accessories with different mounting designs.
✖︎ Existing intercom mounting boxes with screw spacing outside the supported 4" to 5.25" range when using the intended mounting arrangement.
✖︎ Wall openings larger than the adapter's available coverage area.
✖︎ Non-flat or structurally unsuitable mounting surfaces.
Important — Verify Solar Charger Model 5F83E9: Ring offers multiple Solar Charger generations with different power connections and mounting interfaces. This Hidden River Lab adapter is specifically designed for Ring Solar Charger (2nd Gen), Model 5F83E9, with a fork-style connector. Verify the model number and mounting interface before ordering.
Doorbell compatibility: The original Ring Solar Charger determines which Ring video doorbells can be connected. A fork-style connector does not automatically establish compatibility with every Ring device that has screw terminals. Follow Ring's compatibility and installation instructions for your exact charger and doorbell.
Intercom fit: NuTone, M&S, and similar intercom installations vary in box dimensions, mounting-hole locations, and wall-opening sizes. Verify the existing mounting screw spacing and available coverage before ordering.
What's Included
▪︎ 1 × 6.5" × 4.75" Intercom Retrofit Adapter Plate — designed for Ring Solar Charger (2nd Gen), Model 5F83E9.
▪︎ 2 × Mounting screws — for attaching the HRL adapter plate to a suitable existing NuTone / M&S intercom mounting box or compatible mounting surface.
✖︎ Not included: Ring Solar Charger, Ring video doorbell, original Ring Solar Charger mounting screws, wall anchors, legacy intercom mounting box, or other Ring accessories.
Important hardware note: The Ring Solar Charger is attached to the HRL adapter plate using the original compatible mounting screws supplied with the Solar Charger. Hidden River Lab includes two screws for securing the HRL plate to the intercom mounting location. Confirm that you have the appropriate original Ring mounting hardware before installation.
Fit & Measurements
▪︎ Overall adapter dimensions: Approximately 6.5" × 4.75".
▪︎ Construction: One-piece mounting plate.
▪︎ Compatible Solar Charger: Ring Solar Charger (2nd Gen), Model 5F83E9, fork-connector version.
▪︎ Minimum mounting screw-center spacing: Approximately 4".
▪︎ Maximum mounting screw-center spacing: Approximately 5.25".
▪︎ Mounting slots: Two vertically aligned adjustable mounting slots.
▪︎ Mounting application: Compatible NuTone / M&S intercom mounting boxes and suitable flat wall surfaces.
▪︎ Installation purpose: Helps cover legacy intercom openings and provides a mechanical mounting interface for the OEM Solar Charger.
▪︎ Included HRL hardware: Two adapter mounting screws.
▪︎ Solar Charger attachment: Uses the original compatible Ring mounting screws supplied with the charger.
Understanding the 6.5" × 4.75" dimensions:
The 6.5" × 4.75" measurement refers to the Hidden River Lab adapter plate, not the Ring Solar Charger or the video doorbell itself.
The plate is designed to conceal many existing NuTone / M&S intercom cutouts, old screw holes, paint marks, and surrounding cosmetic imperfections while providing an appropriate mounting surface for the compatible Solar Charger.
The adapter's external dimensions do not guarantee complete coverage of every intercom opening. The plate must be fastened securely to suitable mounting points or structural support around the opening.
Understanding the adjustable mounting slots:
The mounting slots provide approximately 4" to 5.25" of supported screw-center spacing. This adjustment helps accommodate compatible existing mounting-hole positions on different legacy intercom boxes.
Measure the distance from the center of the upper mounting screw to the center of the lower mounting screw. Confirm that your existing mounting points fall within the supported range before ordering.
Mounting the Ring Solar Charger:
After securing the Hidden River Lab plate over the old intercom opening, position the compatible Ring Solar Charger 5F83E9 on the adapter and attach it using the original Ring mounting screws intended for that charger.
The fork-style power connector belongs to the Ring Solar Charger and is connected to the compatible Ring doorbell according to Ring's installation instructions. The HRL plate has no electrical charging function.
→ Measure before ordering: Confirm your existing intercom box dimensions, mounting screw-center spacing, wall-opening size, and available mechanical support.
→ Verify your charger: This product is intended for Model 5F83E9. Similar-looking Ring Solar Chargers may use different mounting arrangements.
Why Choose This Adapter
▪︎ Legacy intercom retrofit: Repurpose an existing NuTone / M&S intercom location for a compatible Ring Solar Charger installation.
▪︎ 6.5" × 4.75" opening coverage: Helps conceal old intercom cutouts, screw holes, paint marks, and minor cosmetic wall imperfections.
▪︎ Adjustable mounting screw spacing: Supports approximately 4" to 5.25" between screw centers on compatible legacy intercom boxes.
▪︎ Purpose-built mounting interface: Designed for Ring Solar Charger (2nd Gen), Model 5F83E9.
▪︎ Existing mounting-point reuse: Helps utilize suitable mounting points already present on the old intercom box.
▪︎ One-piece construction: Simple mounting plate without a separate interlocking face plate or multi-part assembly.
▪︎ Works with Ring's fork-connector Solar Charger: Provides a mounting location for an OEM accessory used with compatible Ring battery video doorbells.
▪︎ Clean finished appearance: Helps create a neat transition from a large legacy intercom opening to a modern Ring installation.
▪︎ Two mounting screws included: Includes screws for attaching the HRL plate to a compatible existing intercom mounting box.
▪︎ Uses original Ring attachment hardware: The Solar Charger attaches using the correct mounting screws supplied with the Ring accessory.
▪︎ Professional retrofit application: Useful for homeowners, electricians, low-voltage installers, and smart-home integrators.
Materials & Finish
♺ Made from durable PETG plastic using 3D printing.
▪︎ Designed and manufactured by Hidden River Lab.
▪︎ One-piece mounting plate construction.
▪︎ New condition.
▪︎ Minor marks or layer lines from 3D printing may be visible, particularly on hidden or internal surfaces.
▪︎ Visible surfaces are designed to provide a clean finished appearance once installed.
▪︎ This adapter is a mechanical mounting accessory. It is not an electrical enclosure, solar panel, battery charger, or waterproof sealing system.
Installation Notes
Basic installation tools required (e.g., screwdriver). Additional tools or surface-specific hardware may be necessary depending on the mounting location. Follow Ring's installation instructions for Solar Charger (2nd Gen) and your exact video doorbell model.
▪︎ Step 1 — Verify the Solar Charger. Confirm that your Ring Solar Charger is the fork-connector version, Model 5F83E9. Do not assume that other Solar Charger generations use the same mounting interface.
▪︎ Step 2 — Verify doorbell compatibility. Confirm that your Ring doorbell is supported by the selected OEM Solar Charger. Ring's dedicated Solar Charger (2nd Gen) product specifications list Video Doorbell 3, 3 Plus, 4, Battery Doorbell Plus, and the original Battery Doorbell Pro. Verify the exact hardware combination before installation.
▪︎ Step 3 — Remove the old intercom. Safely remove the existing NuTone / M&S or similar intercom door station. Disconnect power where applicable and properly isolate unused intercom wiring. Do not connect legacy intercom wiring directly to the Ring Solar Charger.
▪︎ Step 4 — Inspect the mounting area. Check the condition of the existing intercom box, surrounding wall, mounting points, and available mechanical support. Confirm that the 6.5" × 4.75" adapter will adequately cover the old opening.
▪︎ Step 5 — Measure the mounting spacing. Measure the distance between the existing mounting screw centers. The HRL adapter supports approximately 4" to 5.25".
▪︎ Step 6 — Position the adapter plate. Place the HRL plate over the existing intercom opening and align its adjustable mounting slots with the suitable mounting points. Confirm that the plate is properly centered and supported.
▪︎ Step 7 — Secure the HRL plate. Attach the adapter to the compatible intercom box using the two included HRL mounting screws, where suitable. Confirm secure attachment without overtightening the screws.
▪︎ Step 8 — Mount the Ring Solar Charger. Position the Ring Solar Charger 5F83E9 on the HRL adapter and secure it using the correct original Ring mounting screws provided with the Solar Charger. Follow Ring's instructions for the correct mounting sequence.
▪︎ Step 9 — Prepare the compatible doorbell. Fully charge the Ring doorbell battery as recommended by Ring before completing the solar installation. Confirm that the doorbell and its mounting components are ready for assembly.
▪︎ Step 10 — Connect the fork-style power leads. Follow Ring's instructions to connect the Solar Charger's fork-style leads to the designated terminals on the compatible Ring video doorbell. Secure the connections using the doorbell's specified terminal screws without damaging or pinching the leads.
Important — Electrical Compatibility: Do not connect the fork leads to unsupported terminals, modify the charger connector, or use the Solar Charger with a doorbell that Ring does not support for this charging configuration. The HRL mounting plate does not change electrical compatibility.
▪︎ Step 11 — Install the Ring doorbell. Complete the doorbell mounting and fastening process using the correct Ring mounting components and instructions for your specific model.
▪︎ Step 12 — Inspect the installation. Verify that the HRL adapter, Solar Charger, and doorbell are securely mounted. Confirm that the fork leads are properly connected and that the solar panels are not obstructed.
▪︎ Step 13 — Complete setup. Follow Ring's instructions for final device setup and verify battery and charging status in the Ring app.
Solar charging performance: Ring recommends at least 3–4 hours of direct sunlight per day for this Solar Charger. For best results, install the charger facing south in the Northern Hemisphere or north in the Southern Hemisphere where practical.
Charging performance varies with sunlight exposure, weather, temperature, battery condition, device settings, and activity. The Hidden River Lab adapter does not generate electricity, increase the Solar Charger's output, or guarantee continuous battery charging.
Installation precautions: Use adequate mechanical support and the correct mounting hardware. Safely isolate unused intercom wiring and weather-seal wall penetrations as appropriate. Do not obstruct the Solar Charger's panels or modify its electrical components. Consult a qualified professional if electrical safety or the original intercom wiring is uncertain.
Model Compatibility FAQ
What Ring Solar Charger does this NuTone / M&S adapter fit?
This 6.5" × 4.75" Hidden River Lab mounting plate is designed for the Ring Solar Charger (2nd Generation), Model 5F83E9, with a fork-style power connector.
Which Ring video doorbells work with Solar Charger 5F83E9?
Ring's dedicated Solar Charger (2nd Gen) product specifications list Ring Video Doorbell 3, Video Doorbell 3 Plus, Video Doorbell 4, the original Battery Doorbell Plus, and the original Battery Doorbell Pro. Verify compatibility for your exact Ring device and charger, particularly if you have a recently released or renamed Ring doorbell.
Does this adapter work with the newer Ring Battery Doorbell 2K Plus or 4K Pro?
This adapter is designed for Solar Charger 5F83E9, not the newer Solar Charger 6GFYA2 used for Battery Doorbell 2K, 2K Plus, and 4K Pro. Similar Ring product names do not mean their Solar Chargers or mounting interfaces are interchangeable.
Does this adapter include the Ring Solar Charger?
No. This product includes the Hidden River Lab intercom mounting plate and two mounting screws. The Ring Solar Charger and Ring video doorbell are sold separately.
Are the Ring Solar Charger mounting screws included?
The compatible Solar Charger attaches to the HRL plate using the original mounting screws supplied with the Ring Solar Charger. The Hidden River Lab package includes two screws for attaching the HRL plate to a compatible intercom mounting location, but not a duplicate set of Ring attachment screws.
What mounting screw spacing does this plate support?
The adapter provides approximately 4" to 5.25" of supported distance between the two mounting screw centers. This range helps accommodate suitable screw positions on older NuTone / M&S intercom boxes.
Will the adapter cover my existing intercom opening?
The plate measures approximately 6.5" × 4.75" and is designed to cover many legacy NuTone / M&S openings. Coverage depends on the original cutout dimensions, mounting locations, and surrounding wall conditions. Measure the existing opening before ordering.
Can I install a Ring doorbell directly onto this HRL adapter?
No. This product is a mounting adapter for Ring Solar Charger 5F83E9. The Ring doorbell is mounted to the compatible Solar Charger assembly using the original Ring installation components.
What is the difference between this charger and a Micro-USB or USB-C Solar Charger?
Solar Charger 5F83E9 uses a fork-style power connector for compatible Ring doorbells. Other Solar Charger generations use Micro-USB, USB-C, or different mounting interfaces. Choose the original Ring Solar Charger intended for your exact doorbell model.
Does this HRL adapter improve solar charging performance?
The Hidden River Lab plate provides mechanical mounting support only. It does not increase the Solar Charger's power output or battery capacity. Charging performance depends on direct sunlight, weather conditions, doorbell settings, and battery usage.
Color & Image Note
Actual product color may vary slightly due to lighting, photography, and display calibration. Images may show Ring Solar Chargers, Ring video doorbells, legacy intercom boxes, original Ring mounting hardware, or example installations for illustration purposes. These components are not included unless explicitly stated above.
Disclaimers & Policies
Brand & Affiliation Disclaimer
This is an aftermarket intercom retrofit mounting adapter manufactured by Hidden River Lab. Hidden River Lab is not affiliated with, sponsored by, or endorsed by Ring, NuTone, or M&S. Ring®, NuTone®, and M&S® are trademarks of their respective owners. Brand names are used solely to identify product compatibility and intended retrofit applications.
Liability Disclaimer
Installation and use of this product are the purchaser's responsibility. To the extent permitted by applicable law, Hidden River Lab is not liable for damage to devices, wiring, mounting surfaces, exterior finishes, or property; loss of functionality; or personal injury resulting from improper installation, misuse, unauthorized modification, inadequate sealing, or unsuitable environmental conditions. If unsure about installation, consult a qualified professional. Nothing in this notice limits rights or remedies that cannot legally be excluded.
Intellectual Property Notice
The product design, images, text, and related listing content are intellectual property of Hidden River Lab. Purchasing this item does not grant any license to copy, reproduce, manufacture, reverse-engineer, or commercially exploit the design in whole or in part.
Support
Not sure whether your existing NuTone / M&S intercom opening matches this 6.5" × 4.75" adapter, whether the mounting screw spacing falls within 4" to 5.25", or whether your Ring Solar Charger is Model 5F83E9? Send us photos of your intercom opening, mounting points, measurements, and Solar Charger model label. We'll help verify the installation requirements before ordering.
Share
