Hidden River Lab
6.5" × 4.75" 25° Reversible NuTone / M&S Intercom Retrofit Adapter for Ring Wired Doorbell 4K Elite (5DFYA7)
6.5" × 4.75" 25° Reversible NuTone / M&S Intercom Retrofit Adapter for Ring Wired Doorbell 4K Elite (5DFYA7)
Couldn't load pickup availability
Overview
Replace a large legacy intercom door station with a modern 4K video doorbell while covering the original wall opening and improving camera positioning. This 6.5" × 4.75" 25° NuTone / M&S Intercom Retrofit Adapter by Hidden River Lab is designed specifically for the Ring Wired Doorbell 4K Elite, Model 5DFYA7, previously known as the Ring Wired Doorbell Elite (2nd Gen).
Designed for many older NuTone / M&S (Music & Sound) intercom installations and similar-size wall openings, this adapter provides a purpose-built mounting interface for the compatible Ring Elite doorbell. The 6.5" × 4.75" wall-covering base plate helps conceal oversized openings, old mounting holes, paint marks, and minor cosmetic imperfections left after removing a legacy intercom station.
Modular three-piece construction: The adapter consists of a 6.5" × 4.75" base plate, a connecting interface, and a reversible 25° corner mount. Together, these three components create a complete intercom retrofit mounting assembly that combines extended wall-opening coverage with a model-specific angled mounting interface for Ring Wired Doorbell 4K Elite.
Two installation configurations: The same kit also provides installation flexibility. When the large intercom cover plate is not required, the included 25° corner mount can be installed separately on a suitable flat wall or compatible standard single-gang electrical box. In this standalone configuration, the corner mount provides approximately 5" × 3" of wall coverage, without using the larger base plate or connecting interface. All installations must also meet Ring's equipment and electrical-box requirements.
The adapter incorporates a fixed 25° horizontal side angle to help direct the Ring camera toward your entrance, walkway, or visitor approach area. Its reversible left/right design allows the camera to be positioned 25° left or 25° right, depending on the installation location. Both installation configurations use the same reversible corner-mount component.
Ethernet cable routing for the Ring doorbell: Ring Wired Doorbell 4K Elite receives power and network connectivity through Power over Ethernet (PoE+) using an RJ45 Ethernet connection. The Hidden River Lab mounting design provides mechanical clearance for routing the Ethernet cable behind the compatible doorbell. The adapter itself contains no electrical or networking components and does not supply power or data connectivity.
This modular mounting solution is particularly useful for professional security installers, low-voltage contractors, electricians, smart-home integrators, and homeowners replacing a legacy intercom system or installing the compatible Ring Wired Doorbell 4K Elite with a 25° horizontal viewing angle.
Important Note:
Ring Wired Doorbell 4K Elite Only: This adapter is designed specifically for Ring Wired Doorbell 4K Elite, Model 5DFYA7.
It is NOT compatible with the original Ring Video Doorbell Elite (1st Gen), product identifier R8VRE7. The original Elite and the newer 4K Elite are different devices with different mounting requirements. Please verify your exact Ring model before ordering.
Compatibility
✔︎ Designed exclusively for:
▪︎ Ring Wired Doorbell 4K Elite — Model 5DFYA7.
▪︎ Ring Wired Doorbell Elite (2nd Gen) — the previous name of the same Ring device, Model 5DFYA7.
✔︎ Intercom retrofit application: Many older NuTone / M&S intercom door stations and similar-size legacy intercom openings.
✔︎ Large retrofit base plate: Approximately 6.5" × 4.75".
✔︎ Standalone 25° corner mount: Approximately 5" × 3" wall-covering footprint.
✔︎ Construction: Three-piece modular assembly consisting of a base plate, connecting interface, and reversible 25° corner mount.
✔︎ Horizontal viewing angle: Built-in fixed 25° side angle.
✔︎ Orientation: Reversible mounting for 25° left or 25° right camera positioning.
✔︎ Vertical inclination: No additional upward or downward tilt.
✔︎ Full retrofit configuration: Compatible legacy intercom mounting locations and suitable flat, stable surfaces with adequate mechanical support.
✔︎ Standalone corner-mount configuration: Mechanically mounts to suitable flat walls or compatible standard single-gang electrical boxes, subject to Ring's installation requirements.
✔︎ Doorbell mounting interface: Designed for Ring Wired Doorbell 4K Elite and its appropriate original Ring mounting bracket.
✔︎ Ethernet cable clearance: Provides space for routing the Ethernet cable used by the Ring doorbell's PoE+ connection.
✔︎ Wall coverage: Helps conceal existing mounting openings, old screw holes, paint marks, and minor cosmetic imperfections within the selected configuration's coverage area.
✖︎ Not compatible with:
✖︎ Original Ring Video Doorbell Elite (1st Gen), product identifier R8VRE7 — including retail configurations such as R8VRE7-0EN0. This is a different generation with a different mounting design.
✖︎ Ring Wired Doorbell 4K Pro (3rd Gen), Model 5DFYA2 — a different Ring doorbell with a different mounting interface.
✖︎ Ring Video Doorbell Pro 2 / Wired Doorbell Pro, Model 5AT2S2.
✖︎ Original Ring Video Doorbell Pro / Wired Doorbell Plus (1st Gen), Model 8VR1P6.
✖︎ Ring Wired Doorbell 2K Plus, Model 5DFYA3.
✖︎ Ring Wired Doorbell 2K, Model 5DFYA4.
✖︎ All Ring Battery Doorbell models.
✖︎ Other Ring video doorbells not specifically listed as compatible.
✖︎ Doorbells from other manufacturers, including eufy, Nest, Arlo, Wyze, and Blink.
✖︎ Non-flat mounting surfaces requiring specially shaped siding or brickmold adapters.
✖︎ Wall openings exceeding the selected mounting configuration's available coverage area or lacking adequate mechanical support.
✖︎ Additional corner mounts, wedges, or third-party mounting accessories unless separately confirmed as compatible.
Important — Verify Your Ring Elite Generation: The original Ring Video Doorbell Elite (1st Gen), identified in retail listings by R8VRE7, is not the same device as the Ring Wired Doorbell 4K Elite (5DFYA7). Their mounting designs are different, and this adapter is intended only for the newer 4K Elite.
Ring product name change: Ring previously marketed Model 5DFYA7 as Wired Doorbell Elite (2nd Gen) and later renamed it Wired Doorbell 4K Elite. These two names identify the same newer device. The original Video Doorbell Elite (1st Gen) is a separate product.
Choosing the mounting configuration: Use the complete three-piece assembly when replacing a large NuTone / M&S intercom opening that requires the 6.5" × 4.75" cover plate. Use the 25° corner mount separately when the smaller 5" × 3" coverage area is sufficient and the mounting location is suitable for standalone installation.
Important — One Corner Mount Included: This kit contains one reversible 25° corner-mount component. It can be used as part of the full intercom retrofit assembly or installed separately. These are alternative mounting configurations, not two independent doorbell mounts that can be installed simultaneously.
Electrical box requirement: The standalone HRL corner mount can be mechanically attached to a suitable flat wall or compatible standard single-gang electrical box. However, Ring specifies an electrical box installed in the wall as a setup requirement for Wired Doorbell 4K Elite. The ability to attach the HRL mount directly to a wall does not eliminate the equipment or installation requirements established by Ring. Verify that the complete installation complies with Ring's instructions and applicable codes.
Ring doorbell power and network requirements: Ring Wired Doorbell 4K Elite requires a compatible IEEE 802.3at PoE+ switch or injector and Cat5e or higher Ethernet cable. These requirements belong to the Ring doorbell. The Hidden River Lab adapter is a mechanical mounting accessory and does not provide electrical power, network connectivity, or PoE conversion.
Existing intercom wiring: Legacy intercom wiring and power supplies are not automatically compatible with Ring Wired Doorbell 4K Elite. The required Ethernet infrastructure must be provided separately. Do not connect old intercom wiring directly to the Ring Ethernet port or assume that original intercom wiring can provide PoE+.
Viewing angle: The adapter changes the direction in which the Ring camera faces but does not increase its optical field of view. Actual coverage depends on mounting location, doorway layout, height, wall geometry, and surrounding obstructions.
What's Included
▪︎ 1 × 6.5" × 4.75" Intercom Retrofit Base Plate — provides extended coverage of many legacy NuTone / M&S intercom openings.
▪︎ 1 × Connecting Interface — connects the large intercom base plate to the reversible 25° corner-mount component.
▪︎ 1 × Reversible 25° Corner Mount — the standard 25° mounting component, also suitable for standalone mechanical installation on a compatible flat wall or standard single-gang electrical box. Provides approximately 5" × 3" of standalone wall coverage.
Mounting hardware: Use the appropriate fasteners for the selected installation configuration, mounting surface, and original Ring mounting bracket. Confirm the supplied package hardware before installation. Additional surface-specific fasteners or anchors may be required.
✖︎ Not included: Ring Wired Doorbell 4K Elite, original Ring mounting bracket, PoE+ switch or injector, Ethernet cable, RJ45 connectors, legacy intercom mounting box, electrical junction box, wall anchors, or additional Ring accessories unless explicitly specified with the selected package.
Important: The package contains one 25° corner mount, which can be used in either installation configuration. The large base plate and connecting interface are not required when the corner mount is installed separately.
Fit & Measurements
▪︎ Large intercom base plate: Approximately 6.5" × 4.75".
▪︎ Standalone corner-mount wall coverage: Approximately 5" × 3".
▪︎ Compatible Ring doorbell: Wired Doorbell 4K Elite / Wired Doorbell Elite (2nd Gen), Model 5DFYA7.
▪︎ Construction: Three modular components — base plate, connecting interface, and reversible 25° corner mount.
▪︎ Intercom retrofit application: Many legacy NuTone / M&S intercom door-station openings and similar-size cutouts.
▪︎ Standalone installation: Mechanically compatible with suitable flat walls and compatible standard single-gang electrical boxes, subject to Ring's installation requirements.
▪︎ Horizontal camera angle: Fixed 25°.
▪︎ Angle direction: Reversible left/right configuration.
▪︎ Additional vertical tilt: 0°.
▪︎ Doorbell mounting: Designed around the Ring Wired Doorbell 4K Elite mounting interface.
▪︎ Ethernet cable: Cat5e or higher, with a suitable cable route and RJ45 connector clearance.
▪︎ Original intercom mounting points: May be reused where the mounting pattern, condition, and structural support are suitable.
Understanding the two mounting configurations:
Configuration A — Full Intercom Retrofit Assembly: Use all three included components: the 6.5" × 4.75" base plate, connecting interface, and reversible 25° corner mount. This configuration is intended for installations where a large legacy NuTone / M&S intercom opening must be covered.
Configuration B — Standalone 25° Corner Mount: Install only the included 25° corner-mount component on a suitable flat wall or compatible standard single-gang electrical box. This configuration provides approximately 5" × 3" of wall coverage and does not require the larger base plate or connecting interface. The completed installation must still satisfy Ring's electrical-box and equipment requirements.
Both configurations provide the same 25° reversible horizontal camera angle for the compatible Ring doorbell. The main differences are the mounting arrangement and the amount of wall coverage.
Understanding the 6.5" × 4.75" dimensions:
The 6.5" × 4.75" measurement refers to the large wall-covering intercom base plate, not the dimensions of the Ring video doorbell or the smaller standalone corner mount.
The larger plate is intended to conceal the mounting area left by many older NuTone / M&S intercom door stations. Legacy intercom installations vary in wall-opening dimensions, recessed housing sizes, mounting-hole locations, and surrounding wall conditions.
The external plate dimensions do not guarantee complete coverage of every opening or compatibility with every existing intercom mounting pattern. The assembly must be securely attached to suitable mounting points or structural support.
Understanding the 5" × 3" standalone footprint:
The included standard 25° corner mount provides approximately 5" × 3" of wall coverage when installed separately. It can be mechanically attached to a suitable flat wall or compatible standard single-gang electrical box without the larger intercom base plate.
This compact configuration is useful when the installation does not require coverage of a large intercom opening. It can help conceal smaller mounting marks, existing screw holes, or the opening of a compatible single-gang electrical box. Follow Ring's requirements for the complete installation, including its in-wall electrical-box requirement.
Understanding the 25° horizontal angle:
The built-in 25° side angle redirects the camera relative to the mounting wall. This is useful when a straight-mounted doorbell would point too far along the wall instead of toward the doorway or approach path.
The reversible corner-mount component supports 25° left or 25° right orientation in either configuration. No separate left-hand or right-hand version is required.
Ethernet cable management:
The mounting arrangement provides space for routing the Ethernet cable used by Ring Wired Doorbell 4K Elite. The cable must be routed to the rear RJ45 connection with appropriate connector clearance and without excessive bending, pinching, sharp edges, or strain.
The adapter contains no Ethernet electronics, PoE circuitry, or power connections. It provides mechanical mounting support, camera positioning, wall coverage, and cable clearance only.
The adapter does not replace an electrical box or other installation component required by Ring or applicable codes. Verify the suitability of the existing box, wall structure, and cable routing before installation.
→ Measure your mounting area: Compare the existing wall opening, mounting-hole positions, and required coverage with the dimensions of the selected configuration.
→ Select the appropriate configuration: Use the full three-piece assembly for larger intercom openings or the standalone 25° corner mount where the smaller mounting footprint is sufficient.
→ Verify your Ring model: This adapter is designed exclusively for 5DFYA7. It does not fit the original Video Doorbell Elite (R8VRE7) or Ring Wired Doorbell 4K Pro (5DFYA2).
Ideal Installation Scenarios — 25°
Legacy intercom beside the front door: When an existing NuTone / M&S intercom opening is located to the left or right of the entrance, the complete three-piece adapter helps cover the large opening while redirecting the Ring camera toward the visitor approach area.
Offset intercom location: When the old intercom station is positioned some distance from the doorway, the 25° horizontal correction can help direct the camera toward the entrance, steps, or walkway.
Standalone flat-wall installation: When no large intercom opening needs to be covered, the included 25° corner mount can be mechanically attached separately to a suitable flat wall. The smaller 5" × 3" footprint provides a more compact mounting arrangement. The complete installation must still meet Ring's electrical-box requirements.
Standard single-gang electrical box installation: The standalone 25° corner-mount component can also be installed over a compatible single-gang electrical box, providing a model-specific angled mounting interface for Ring Wired Doorbell 4K Elite without requiring the larger NuTone / M&S base plate.
Ethernet-equipped retrofit installations: Both mounting configurations provide mechanical clearance for the Ethernet cable required by Ring Wired Doorbell 4K Elite. Power and networking are provided separately through the appropriate PoE+ infrastructure.
Choosing the correct angle: A 25° angle is useful when moderate horizontal camera correction is needed. Installations on walls perpendicular to the front door, or locations requiring stronger camera rotation, may benefit from a different angle depending on the entryway geometry.
Important: The adapter redirects the camera but does not expand its optical field of view. It does not guarantee simultaneous coverage of the entire walkway, yard, or doorway. Actual visibility depends on the mounting location, height, camera specifications, and surrounding obstructions.
Why Choose This Adapter
▪︎ Legacy NuTone / M&S intercom retrofit: Replace an older intercom door station with a compatible Ring Wired Doorbell 4K Elite installation.
▪︎ 6.5" × 4.75" opening coverage: The large base plate helps conceal old intercom cutouts, screw holes, paint marks, and minor cosmetic wall imperfections.
▪︎ Modular three-piece construction: Includes a large base plate, connecting interface, and reversible 25° corner mount.
▪︎ Two mounting configurations: Use all three components for a large intercom retrofit or install the 25° corner mount separately where the smaller mounting footprint is sufficient.
▪︎ 5" × 3" standalone mounting option: The included standard corner mount provides a compact alternative when large wall coverage is unnecessary.
▪︎ Built-in 25° camera positioning: Redirects the Ring camera toward the entrance, walkway, or visitor approach area.
▪︎ Reversible left/right design: The same corner-mount component supports either horizontal angle direction.
▪︎ Purpose-built Ring Elite fit: Designed specifically for Ring Wired Doorbell 4K Elite, Model 5DFYA7.
▪︎ Ethernet cable routing: Provides mechanical clearance for the cable and rear RJ45 connection used by the compatible Ring doorbell.
▪︎ No electrical components: The HRL adapter is a mechanical mounting accessory; PoE+ power and Ethernet connectivity are provided by separate network infrastructure.
▪︎ Clean finished appearance: Helps create a professional-looking installation, with either large intercom-opening coverage or a smaller standalone mounting footprint.
▪︎ Professional retrofit flexibility: Useful for low-voltage installers, electricians, security contractors, and smart-home integrators.
▪︎ Designed and manufactured by Hidden River Lab: A specialized aftermarket mounting solution for Ring Wired Doorbell 4K Elite.
Materials & Finish
♺ Made from durable PETG plastic using 3D printing.
▪︎ Designed and manufactured by Hidden River Lab.
▪︎ Three-piece modular construction.
▪︎ Intended for compatible exterior doorbell mounting applications.
▪︎ New condition.
▪︎ Minor marks or layer lines from 3D printing may be visible, especially on internal or hidden surfaces.
▪︎ Visible surfaces are designed to provide a clean finished appearance once installed.
▪︎ The adapter is a mechanical mounting accessory and is not represented as a waterproof, NEMA/IP-rated, or certified electrical enclosure.
Installation Notes
This product supports two alternative mechanical mounting configurations for Ring Wired Doorbell 4K Elite. Choose the configuration that matches your installation requirements. The HRL adapter itself contains no electrical components; the Ring doorbell requires separate PoE+ power and Ethernet connectivity. Follow Ring's instructions, including its in-wall electrical-box setup requirement, and all applicable electrical and building requirements.
Configuration A — Full Three-Piece NuTone / M&S Intercom Retrofit
▪︎ Step 1 — Verify the Ring model. Confirm that your doorbell is Ring Wired Doorbell 4K Elite, Model 5DFYA7, formerly Wired Doorbell Elite (2nd Gen). Do not use this adapter with the original Video Doorbell Elite (R8VRE7), Ring Wired Doorbell 4K Pro (5DFYA2), or other incompatible Ring models.
▪︎ Step 2 — Inspect the existing intercom opening. Measure the old NuTone / M&S opening, inspect the wall construction and mounting points, and verify that the 6.5" × 4.75" base plate provides sufficient coverage and support. Check that the existing installation meets Ring's requirements or can be appropriately prepared to do so.
▪︎ Step 3 — Select the viewing direction. Determine whether the camera should face 25° left or 25° right to provide the desired view of the doorway and approach path.
▪︎ Step 4 — Disconnect and remove the old intercom. Disconnect power to the existing intercom system as appropriate, remove the original door station, and safely manage or isolate unused wiring. Do not connect old intercom wiring directly to the Ring Ethernet connection.
▪︎ Step 5 — Prepare the Ring doorbell's Ethernet infrastructure. Provide a compatible IEEE 802.3at PoE+ switch or injector and properly installed Cat5e or higher Ethernet cable. These components provide power and network connectivity to the Ring doorbell, not to the HRL adapter.
▪︎ Step 6 — Route the Ethernet cable. Bring the cable through the appropriate mounting opening. Allow sufficient RJ45 connector clearance and avoid sharp bends, pinched cables, or excessive strain.
▪︎ Step 7 — Install the large base plate. Position the 6.5" × 4.75" HRL base plate over the legacy intercom opening and secure it to suitable mounting points or structural support using appropriate fasteners.
▪︎ Step 8 — Attach the connecting interface. Align the connecting interface with the base plate and secure it using the appropriate assembly hardware. Verify correct alignment and attachment before proceeding.
▪︎ Step 9 — Attach the reversible 25° corner mount. Select the appropriate left or right orientation and attach the included 25° corner-mount component to the connecting interface using the intended mounting points and fasteners.
▪︎ Step 10 — Verify the three-piece assembly. Confirm that the base plate, connecting interface, and corner mount are correctly aligned, fully seated, and securely fastened. Ensure that the Ethernet cable remains unobstructed.
▪︎ Step 11 — Install the Ring mounting bracket. Secure the compatible original Ring Wired Doorbell 4K Elite mounting bracket to the HRL corner mount using appropriate fasteners and Ring's installation instructions.
▪︎ Step 12 — Connect the Ring doorbell. Connect the Ethernet cable to the doorbell's RJ45 port following Ring's instructions. Confirm correct connector seating and sufficient cable clearance.
▪︎ Step 13 — Mount the doorbell. Attach Ring Wired Doorbell 4K Elite to its mounting bracket and secure it using Ring's specified hardware and installation procedure.
▪︎ Step 14 — Complete installation. Verify that the assembly is secure, the Ethernet connection is properly managed, and the camera faces the intended viewing area. Follow Ring's instructions for network setup and final testing.
Configuration B — Standalone 25° Corner Mount
Use this configuration when the installation does not require the larger 6.5" × 4.75" intercom cover plate. Only the included 5" × 3" reversible 25° corner-mount component is installed. The large base plate and connecting interface are not used.
▪︎ Step 1 — Verify compatibility. Confirm that the Ring doorbell is Model 5DFYA7 and that the selected mounting location meets the mechanical and electrical installation requirements for the device.
▪︎ Step 2 — Prepare the mounting location. Choose a suitable flat wall or compatible standard single-gang electrical box. Confirm adequate mechanical support and compliance with Ring's requirement for an electrical box installed in the wall.
▪︎ Step 3 — Select the viewing direction. Orient the corner mount for 25° left or 25° right camera positioning, depending on the doorway layout.
▪︎ Step 4 — Prepare the Ethernet cable. Route the compatible Ethernet cable through the intended mounting area and ensure that sufficient clearance is available for the RJ45 connection.
▪︎ Step 5 — Secure the corner mount. Mechanically attach the 25° corner mount to the suitable flat mounting surface or compatible single-gang electrical box using appropriate fasteners. The large base plate and connecting interface are not required for this configuration.
▪︎ Step 6 — Install the Ring mounting bracket and doorbell. Attach the compatible original Ring mounting bracket to the corner mount, connect the Ethernet cable, and secure Ring Wired Doorbell 4K Elite according to Ring's instructions.
▪︎ Step 7 — Complete installation. Verify secure mounting, correct cable routing, and the intended camera viewing direction. Complete network setup and operational testing according to Ring's instructions.
Important — Mounting Configuration: The included 25° corner mount is used in either the complete three-piece retrofit assembly or the standalone configuration. The same corner-mount component cannot be installed in both configurations at the same time.
Existing intercom, chime, or access-control wiring: Any existing wiring must be evaluated separately. Do not assume that original intercom wiring or control circuits can be reused for the Ring doorbell without verification. Follow Ring's electrical and installation requirements.
Installation precautions: Use a stable mounting surface and appropriate fasteners for the selected configuration. Follow Ring's requirements regarding electrical boxes, cabling, grounding, and wall construction. Weather-seal surrounding wall penetrations as appropriate without obstructing required drainage, ventilation, or device functions.
The HRL adapter is not a substitute for an electrical enclosure or other installation component required by Ring or applicable building and electrical codes. If the mounting structure, wiring, or electrical requirements are uncertain, consult a qualified low-voltage installer or electrician.
Model Compatibility FAQ
Does this adapter fit Ring Wired Doorbell 4K Elite, Model 5DFYA7?
Yes. This 6.5" × 4.75" 25° NuTone / M&S intercom retrofit adapter is designed specifically for Ring Wired Doorbell 4K Elite, Model 5DFYA7, previously named Wired Doorbell Elite (2nd Gen).
Will this adapter fit the original Ring Video Doorbell Elite (1st Gen), R8VRE7?
No. The original Ring Video Doorbell Elite (1st Gen), commonly identified in retail listings by R8VRE7, has a different mounting design. This Hidden River Lab adapter is made for the newer Ring Wired Doorbell 4K Elite, Model 5DFYA7. The two generations are not mechanically interchangeable.
Is Ring Wired Doorbell Elite (2nd Gen) the same as Ring Wired Doorbell 4K Elite?
Yes. Ring renamed Wired Doorbell Elite (2nd Gen) to Wired Doorbell 4K Elite. Both names refer to the same newer device, identified by Model 5DFYA7.
Will this adapter fit Ring Wired Doorbell 4K Pro, Model 5DFYA2?
No. Ring Wired Doorbell 4K Pro (5DFYA2) and Ring Wired Doorbell 4K Elite (5DFYA7) are different devices with different mounting interfaces. This adapter is designed exclusively for the 4K Elite.
Is this the same product as the standard 25° Ring Wired Doorbell 4K Elite Corner Mount?
Not exactly. Both products use the same reversible 25° corner-mount component. The standard mount provides approximately 5" × 3" of wall coverage and can be mechanically installed on a suitable flat wall or compatible standard single-gang electrical box.
This intercom retrofit kit adds a larger 6.5" × 4.75" base plate and a connecting interface to cover many legacy NuTone / M&S intercom openings. The same 25° corner-mount component forms the front mounting section of the complete three-piece assembly.
The included corner mount can also be installed separately without the larger base plate or connecting interface when the smaller mounting footprint is sufficient. In either configuration, the complete Ring doorbell installation must meet Ring's equipment requirements.
Can I use the included 25° corner mount without the large NuTone / M&S base plate?
Yes. The included reversible 25° corner mount can be mechanically installed separately on a suitable flat wall or compatible standard single-gang electrical box. In this configuration, it provides approximately 5" × 3" of wall coverage. The larger 6.5" × 4.75" base plate and connecting interface are not required for the mechanical mounting configuration.
Does this kit include two separate 25° corner mounts?
No. This kit includes one reversible 25° corner-mount component. It can be used as part of the full three-piece intercom retrofit assembly or installed separately. These are two alternative installation configurations.
Can this adapter replace an old NuTone or M&S intercom door station?
Yes, in compatible installations. The complete three-piece assembly helps cover the opening left by many older NuTone / M&S intercom stations and provides a 25° angled mounting interface for Ring Wired Doorbell 4K Elite. Existing intercom wiring, electrical-box suitability, and mounting conditions must be evaluated separately.
What size wall opening does the adapter cover?
The complete intercom retrofit configuration uses a base plate measuring approximately 6.5" × 4.75". The standalone corner-mount component provides approximately 5" × 3" of wall coverage. Actual coverage depends on the existing opening dimensions, mounting-hole positions, and surrounding wall condition.
Can the 25° adapter be installed on either side of the front door?
Yes. The reversible 25° corner-mount component supports 25° left or 25° right horizontal camera positioning in both installation configurations.
Does the HRL adapter provide PoE+ power or an Ethernet connection?
No. The Hidden River Lab adapter is a mechanical mounting accessory. It provides mounting support, a fixed 25° camera angle, wall-opening coverage, and space for Ethernet cable routing. Ring Wired Doorbell 4K Elite requires separate IEEE 802.3at PoE+ equipment and Cat5e or higher Ethernet cabling. The HRL adapter does not contain electrical or network components.
Does the standalone corner mount require an electrical box behind the doorbell?
The HRL corner mount itself can be mechanically attached to a suitable flat wall or compatible standard single-gang electrical box. However, Ring specifies an electrical box installed in the wall as a setup requirement for Wired Doorbell 4K Elite. The mechanical mounting options offered by the HRL adapter do not override Ring's installation instructions or applicable electrical and building codes.
Does the 25° adapter increase the camera's field of view?
No. The adapter changes the camera's viewing direction but does not increase its optical field of view. Actual coverage depends on the Ring camera, mounting height, wall geometry, and surrounding obstructions.
Color & Image Note
Actual product color may vary slightly due to lighting, photography, and screen calibration. Images may show Ring video doorbells, original Ring mounting brackets, Ethernet cables, legacy intercom components, electrical boxes, or example installations for illustration purposes. These components are not included unless explicitly stated above.
Disclaimers & Policies
Brand & Affiliation Disclaimer
This is an aftermarket intercom retrofit mounting adapter manufactured by Hidden River Lab. Hidden River Lab is not affiliated with, sponsored by, or endorsed by Ring, NuTone, or M&S. Ring®, NuTone®, and M&S® are trademarks of their respective owners. Brand names are used solely to identify product compatibility and intended retrofit applications.
Liability Disclaimer
Installation and use of this product are the purchaser's responsibility. To the extent permitted by applicable law, Hidden River Lab is not liable for damage to devices, wiring, mounting surfaces, exterior finishes, or property; loss of functionality; or personal injury resulting from improper installation, misuse, unauthorized modification, inadequate sealing, or unsuitable environmental conditions. If unsure about installation, consult a qualified professional. Nothing in this notice limits rights or remedies that cannot legally be excluded.
Intellectual Property Notice
The product design, images, text, and related listing content are intellectual property of Hidden River Lab. Purchasing this item does not grant any license to copy, reproduce, manufacture, reverse-engineer, or commercially exploit the design in whole or in part.
Support
Not sure whether your Ring doorbell is the newer Wired Doorbell 4K Elite (5DFYA7) or the original Video Doorbell Elite (R8VRE7)? Need to confirm whether the 6.5" × 4.75" three-piece intercom retrofit configuration will cover your existing NuTone / M&S opening, or whether the 5" × 3" standalone 25° corner mount is better suited to your installation? Send us photos of your Ring doorbell, its model identifier, the mounting area, and measurements. We'll help verify compatibility and the appropriate mounting configuration before ordering.
Share
