Blink Video Doorbell (2023 Release) Intercom Retrofit Adapter for NuTone/M&S – Hidden Screws, 0° Straight View

Overview

Modernize a legacy intercom opening with a clean, low-profile retrofit made for the Blink Video Doorbell (2023 release). This two-piece intercom adapter plate by Hidden River Lab is purpose-built for many NuTone & M&S (Music & Sound) intercom openings. The back plate covers the old cutout for a professional finish, while the hidden-screw design helps keep the install clean and secure.

0° straight view keeps the camera framing natural.

Compatibility

✔︎ Designed for:

• Blink Video Doorbell 1st Gen(marketed as the 2023 release) model: 

  BDM00200U

✔︎ Retrofits: Many NuTone & M&S intercom door stations (and similar-size openings)

✔︎ Angle: 0° straight view (no wedges or corner angles)

✔︎ Mounting surface: Flat only

✖︎ Not compatible with:

• Blink Head-to-Toe doorbell model

• Corner kits, wedges, or third-party angle adapters

• Any other Blink doorbell models not listed above

Not sure which Blink model you have? Send us a photo of your doorbell and intercom opening — we’ll confirm fitment.

What’s Included

▪︎ 1 × Back plate (covers intercom opening; reuses old holes where possible)

▪︎ 1 × Face plate (mounting interface for your Blink doorbell)

▪︎ All required mounting screws (included)

✖︎ Doorbell, OEM backplate, and intercom/wall screws or anchors are not included. Photos may show example setups for illustration.

Fit & Measurements

▪︎ Purpose-built to cover many NuTone/M&S intercom cutouts on flat surfaces

▪︎ Designed to reuse existing holes where possible for easier retrofit installs

→ Please compare measurements to your opening before purchase. If you want, send photos/measurements and we’ll help verify fit.

Why You’d Use This Adapter

▪︎ Intercom retrofit made simple: Covers the original opening for a cleaner finished look

▪︎ Hidden, clean hardware: Concealed screws for a professional appearance

▪︎ Straight camera framing: 0° view without wedges or corner angles

▪︎ Stable mount: Designed to sit flush and reduce rocking on flat surfaces

Installation Notes

Basic tools required (e.g., screwdriver).

▪︎ Remove the old intercom door station.

▪︎ Position the back plate over the opening (reuse original holes where applicable).

▪︎ Attach the face plate to the back plate using the included screws (hidden-screw design).

▪︎ Mount the Blink doorbell per Blink’s instructions.

▪︎ Weather-seal as appropriate for your environment.

If you’re unsure about fitment or your install is non-standard, message us with photos — we’ll help quickly.

Materials & Finish

♺ 3D-printed durable plastic for everyday outdoor use.

▪︎ New condition. Minor internal artifacts may be visible due to additive manufacturing (3D printing). External faces are designed to present cleanly once installed.

Color & Image Note

Actual color may vary slightly due to lighting and display calibration. Photos may show example setups; Blink components shown are not included unless stated above.

Brand & Affiliation Disclaimer

This is an aftermarket product made by Hidden River Lab. It is not affiliated with, sponsored by, or endorsed by Blink, NuTone, or M&S. Blink®, NuTone®, and M&S® are trademarks of their respective owners. Brand names are used solely to indicate compatibility.

Intellectual Property Notice

The design, images, and listing text are intellectual property of Hidden River Lab. Purchase does not grant any license to copy, reproduce, manufacture, reverse-engineer, or commercially exploit the design in whole or in part.

Support

Not sure if you have the Blink Video Doorbell (2023 release) or whether your opening is NuTone/M&S? Message us with photos of your intercom opening — we’ll help quickly.