4" Standard Vinyl Clapboard Siding Mount for Ring Wired Doorbell 4K Pro (3rd Gen)

Overview

Install the newest Ring Wired Doorbell 4K Pro (3rd Gen), Model 5DFYA2, on standard vinyl clapboard siding with 4" visible sections. This Hidden River Lab mount fits the angled siding shape and provides a flat, vertical surface for the original Ring mounting plate.

Instead of fastening the original Ring mounting plate directly to sloped siding, this adapter provides an upright mounting surface. It does not intentionally turn the camera left or right or tilt it up or down.

This version fits 4" standard vinyl clapboard siding (Double 4 / D4). The 4" size means the visible height of one siding section (panel exposure), not the combined height of the two-section panel (about 8" total). It does not fit Dutch Lap or traditional wood or metal clapboard siding.

Compatibility

✔︎ Designed for:
▪︎ Ring Wired Doorbell 4K Pro (3rd Gen) — Model 5DFYA2.
✔︎ Siding size: 4" visible height of one standard vinyl clapboard siding section (panel exposure).
✔︎ Mounting function: The shaped back follows the raised and sloped siding surface to create a flat, vertical mounting face.
✔︎ Camera position: Flat, vertical mounting face; no additional left/right turn or up/down tilt.
✔︎ Doorbell attachment: Fits the original Ring mounting plate for the compatible model.

✖︎ Not compatible with:
✖︎ 5" standard vinyl clapboard siding — requires a separate size-specific mount.
✖︎ Dutch Lap siding of any size — has a different shape from standard vinyl clapboard.
✖︎ Traditional wood or metal clapboard siding — use a suitable standalone vertical wedge mount instead.
✖︎ Ring Wired Doorbell 2K Plus (2nd Gen) — Model 5DFYA3.
✖︎ Ring Wired Doorbell 2K (2nd Gen) — Model 5DFYA4.
✖︎ Older Ring Wired Doorbell models, including previous Pro/Plus generations and Elite models.
✖︎ All Ring Battery Doorbell models, including 4K Pro, 2K Plus, and 2K.
✖︎ Doorbells from other manufacturers, including eufy, Nest, Arlo, Wyze, Blink, Amcrest, and other brands.
✖︎ Other siding shapes that do not match the back of the mount shown in the product photos.

Important: This adapter is made exclusively for Ring Wired Doorbell 4K Pro (3rd Gen), Model 5DFYA2. It does not fit Wired Doorbell 2K Plus (5DFYA3), Wired Doorbell 2K (5DFYA4), or Ring Battery models. Verify your model number before ordering.

Measure before ordering: Confirm the visible height of one standard vinyl clapboard section is approximately 4" and compare the siding shape with our product photos. A matching dimension alone does not guarantee a matching shape.

What's Included

▪︎ 1 × 4" standard vinyl clapboard siding mount — dedicated profile-matching HRL adapter.
▪︎ Long mounting screws for attaching the HRL adapter to a suitable mounting surface (typically two).
▪︎ Short mounting screws for attaching the original Ring mounting plate to the HRL adapter (typically two; additional screws may be supplied where needed).
✖︎ Not included: Ring doorbell, original Ring mounting plate, siding material, and electrical accessories.

Fit & Measurements

▪︎ Siding size: 4" visible height of one standard vinyl clapboard siding section (panel exposure).
▪︎ Siding shape: Standard vinyl clapboard; compare the shape shown in the product photos and check the visible section height before ordering.
▪︎ Mounting function: Shaped back follows the siding surface; front provides a flat, vertical mounting area for the original Ring bracket.
▪︎ Camera position: Straight ahead, with no additional left/right turn or up/down tilt.
▪︎ Installation surface: Siding with solid supporting material behind it to hold the mounting screws.

→ Siding-shape note: Different manufacturers may use slightly different siding shapes, even with the same visible section height. Compare the side profile shown in our product photos before ordering.

→ Choose the correct siding size and shape: The 4" standard vinyl clapboard mount is not interchangeable with 5" standard vinyl clapboard mounts or the other siding style.

Why Choose This Mount

▪︎ Flat, vertical mounting area: Keeps the original Ring mounting plate upright instead of following the sloped siding surface.
▪︎ Model-specific fit: Designed only for Ring Wired Doorbell 4K Pro (3rd Gen), model 5DFYA2.
▪︎ Made for this siding shape: Designed for 4" standard vinyl clapboard siding instead of using a generic spacer.
▪︎ Neat finished appearance: Provides a tidy, flat mounting area for the doorbell.
▪︎ Designed for the Ring mounting plate: Provides a compatible front face for the original Ring doorbell bracket.
▪︎ Outdoor-ready material: Durable PETG plastic made by 3D printing.

Materials & Finish

♺ Made from durable, outdoor-ready PETG plastic using 3D printing.
▪︎ Designed and manufactured by Hidden River Lab.
▪︎ New condition, intended for everyday outdoor mounting applications.
▪︎ Minor marks or layer lines from 3D printing may be visible, especially on hidden or internal surfaces.
▪︎ Visible surfaces are designed to provide a clean finished appearance once installed.

Installation Notes

Basic installation tools may be required (e.g., screwdriver). Follow the installation instructions for your exact Ring doorbell model.

▪︎ Step 1 — Check your doorbell and siding. Confirm your Ring model number and the siding type before starting.

▪︎ Step 2 — Measure one siding section. Measure the visible height of one section and confirm it is approximately 4". Compare the siding shape with the product photos.

▪︎ Step 3 — Prepare the mounting area. Check that the siding and material behind it can securely hold the mounting screws. If wiring is present, handle it safely.

▪︎ Step 4 — Check the fit. Hold the shaped back of the mount against the siding. Confirm it matches the siding shape and that the front mounting face is vertical.

▪︎ Step 5 — Secure the HRL mount. Use the appropriate supplied long screws to attach the mount to solid supporting material behind the siding. Do not overtighten or distort the siding.

▪︎ Step 6 — Attach the Ring mounting plate. Fasten the original Ring mounting bracket to the flat front face using the supplied short screws appropriate for that bracket.

▪︎ Step 7 — Install the Ring doorbell. Attach the doorbell according to Ring's instructions, make approved electrical connections if needed, and complete setup.

▪︎ Step 8 — Check the finished installation. Confirm the mount and doorbell are secure, the camera points in the intended direction, and outdoor sealing is appropriate for the wall.

Do not use this mount on a different siding size or shape. Make sure the screws fasten to solid supporting material behind the siding, and follow Ring's instructions for wiring and outdoor sealing.

Color & Image Note

Actual product color may vary slightly due to lighting, photography, and screen settings. Images may show compatible Ring doorbells, original Ring mounting brackets, siding, trim, wiring, or example installations for illustration purposes. Ring doorbell and illustrated accessories are not included unless expressly stated.

Disclaimers & Policies

Brand & Affiliation Disclaimer

This is an aftermarket doorbell mounting accessory designed and manufactured by Hidden River Lab. Hidden River Lab is not affiliated with, sponsored by, or endorsed by Ring. Ring® is a trademark of its respective owner. Brand names and model names are used solely to identify product compatibility.

Liability Disclaimer

Installation and use of this product are the purchaser's responsibility. To the extent permitted by applicable law, Hidden River Lab is not liable for damage to devices, wiring, mounting surfaces, exterior finishes, or property; loss of functionality; or personal injury resulting from improper installation, misuse, unauthorized modification, inadequate sealing, or unsuitable environmental conditions. If unsure about installation, consult a qualified professional. Nothing in this notice limits rights or remedies that cannot legally be excluded.

Intellectual Property Notice

The product design, images, text, and related listing content are intellectual property of Hidden River Lab. Purchasing this item does not grant any license to copy, reproduce, manufacture, reverse-engineer, or commercially exploit the design in whole or in part.

Support

Not sure if you have 4" standard vinyl clapboard siding? Send us a side-view photo of the siding, the visible height of one section, and your Ring model number. We can help confirm the correct mount.