5.5° Wedge Mount for Ring Doorbell Pro / Wired Doorbell Plus (1st Gen) – Tilt Bracket

Overview

 

Aim your camera slightly upward or downward (depending on orientation) with a clean, simple 5.5° wedge mount made for the Ring Doorbell Pro / Ring Wired Doorbell Plus (1st Gen). 

This 5.5° wedge mount by Hidden River Lab is made for the Ring Doorbell Pro / Ring Wired Doorbell Plus (1st Gen)and is designed to compensate for siding’s natural incline (traditional siding and many other siding profiles). It helps bring the doorbell closer to level so the camera view looks more natural.

Important: This wedge is for the older footprint (Doorbell Pro / Wired Doorbell Plus 1st Gen), not the newer models.

---

Compatibility

 

✔︎ Designed for: Ring Doorbell Pro / Ring Wired Doorbell Plus (1st Gen)

✔︎ Angle: 5.5° incline wedge

✔︎ Mounting surface: Traditional siding and other angled siding profiles; also works on flat surfaces when a small tilt is desired

✖︎ Not compatible with:

• Ring Doorbell Pro 2

• Ring Wired Doorbell Plus (2nd Gen) / Retinal 4K

• Any other Ring models not listed above

 

If you’re unsure which model you have, message us with a photo of your doorbell and mounting area — we’ll confirm fitment.

---

What’s Included

 

▪︎ 1 × 5.5° wedge mount / incline bracket

▪︎ Screws

✖︎ Doorbell, wall anchors, are not included. Photos may show example setups for illustration.

---

Fit & Measurements

 

▪︎ Purpose-built for the Ring Doorbell Pro / Wired Doorbell Plus (1st Gen) footprint

▪︎ Reversible orientation: Can be installed in either direction depending on the angle you need

→ Please verify your doorbell model before purchase. If you want, send a photo and we’ll confirm.

---

Why You’d Use This Wedge

 

▪︎ Improves camera framing: Adds a mild 5.5° tilt to better capture your entry area

▪︎ Helps in tricky placements: Useful when the doorbell sits too high/low or the view needs a small adjustment

▪︎ Simple, clean install: Minimal wedge angle for a neat look

▪︎ Versatile use: Works with traditional siding and many other angled surfaces

---

Installation Notes

 

Basic tools required (e.g., screwdriver). Anchors may be needed depending on your wall surface.

▪︎ Place the wedge between the mounting surface and the doorbell mounting setup.

▪︎ Confirm the doorbell sits level and adjust positioning as needed.

▪︎ Weather-seal as appropriate for your environment.

For unusual siding or a special angle requirement, message us with photos — we’ll recommend the right option.

---

Materials & Finish

 

♺ 3D-printed durable plastic for everyday outdoor use.

▪︎ New condition. Minor internal artifacts may be visible due to additive manufacturing (3D printing). External faces are designed to present cleanly once installed.

---

Color & Image Note

 

Actual color may vary slightly due to lighting and display calibration. Photos may show example setups; doorbell and hardware are not included unless stated above.

---

Brand & Affiliation Disclaimer

 

This is an aftermarket product made by Hidden River Lab. It is not affiliated with, sponsored by, or endorsed by Ring. Ring® is a trademark of its respective owner. Brand names are used solely to indicate compatibility.

---

Intellectual Property Notice

 

The design, images, and listing text are intellectual property of Hidden River Lab. Purchase does not grant any license to copy, reproduce, manufacture, reverse-engineer, or commercially exploit the design in whole or in part.

---

Support

 

Not sure whether you have the 1st Gen model or need a different wedge? Message us with photos of your doorbell and mounting area — we’ll help quickly.