0.75” Spacer for Ring Battery Doorbell (5F97F2) – Extra Depth for Wiring & Wire Nuts

Overview

 

Clean up a tight install and gain extra enclosed space behind your doorbell. This 0.75” spacer by Hidden River Lab is purpose-built for the Ring Battery Doorbell (model 5F97F2) to help hide wiring and wire nuts inside the spacer enclosure for a cleaner, more professional finish.

0° straight view keeps your camera framing natural (no wedge/tilt).

---

Compatibility

 

✔︎ Designed for: Ring Battery Doorbell (model 5F97F2)

✔︎ Angle: 0° (no horizontal side angle, no vertical tilt)

✔︎ Purpose: Adds enclosed depth for wiring and wire nuts behind the doorbell

✖︎ Not compatible with: Ring Battery Doorbell Pro/Plus, Ring 3/4, or other Ring models

✔︎ Mounting surface: Flat recommended (standard doorbell mounting locations)

---

What’s Included

 

▪︎ 1 × 0.75” spacer / mounting bracket (0° straight view)

▪︎ Mounting screws (included)

✖︎ Doorbell not included. Photos may show example setups for illustration.

---

Fit & Measurements

 

▪︎ Spacer depth: 0.75” additional enclosed space

▪︎ Adds approximately 0.75” to the overall doorbell assembly depth

→ If you’re unsure about fitment, message us with a photo of your doorbell and mounting area — we’ll confirm compatibility.

---

Why You’d Use This Spacer

 

▪︎ Hide wiring & wire nuts: Extra internal room to keep wiring tucked away inside the enclosure

▪︎ Cleaner finish: Helps avoid cramped installs where wires push the doorbell outward

▪︎ Straight camera view: No tilt — ideal when you don’t need a wedge angle

---

Installation Notes

 

Basic tools required (e.g., screwdriver).

▪︎ Ensure wiring is safely capped and positioned before final mounting.

▪︎ Weather-seal as appropriate for your surface and environment.

▪︎ If your setup varies (recessed surfaces, uneven siding, non-flat trim), send photos — there may be a better fit option.

---

Materials & Finish

 

♺ 3D-printed durable plastic for everyday outdoor use.

▪︎ New condition. Minor internal artifacts may be visible due to additive manufacturing (3D printing). External faces are designed to present cleanly once installed.

---

Color & Image Note

 

Colors may vary slightly due to lighting and display calibration. Photos may show example setups; doorbell is not included unless stated above.

---

Brand & Affiliation Disclaimer

 

This is an aftermarket product made by Hidden River Lab. It is not affiliated with, sponsored by, or endorsed by Ring. Ring® is a trademark of its respective owner. Brand names are used solely to indicate compatibility.

---

Intellectual Property Notice

 

The design, images, and listing text are intellectual property of Hidden River Lab. Purchase does not grant any license to copy, reproduce, manufacture, reverse-engineer, or commercially exploit the design in whole or in part.

---

Support

 

Not sure which Ring model you have? Message us with a photo of your doorbell and mounting area — we’ll help quickly.