Eufy S220 Video Doorbell 5.5° Vertical Wedge — Up/Down Tilt Bracket

Overview

Fine-tune your camera angle on angled siding or high mounting locations with this 5.5° vertical wedge by Hidden River Lab designed for the Eufy S220 Video Doorbell 2K (Battery-powered). It is also compatible with Eufy E8210 / T8210. The wedge helps compensate siding incline and can also be used on flat walls to tilt the doorbell up or down depending on orientation.

5.5° vertical tilt helps improve framing while keeping a clean, stable install.

Compatibility

✔︎ Designed for:

• Eufy S220 Video Doorbell 2K (Battery-powered)

• Also compatible with: Eufy E8210 / T8210

✔︎ Angle: 5.5° vertical tilt (up or down depending on orientation)

✔︎ Use case: Siding incline compensation; flat walls when a small vertical tilt is needed

✔︎ Orientation: Universal — can be mounted on either side of the door (left/right)

✖︎ Not compatible with:

• Other Eufy doorbell models not listed above

Not sure which model you have? Send us a photo of your doorbell and mounting area — we’ll confirm fitment.

What’s Included

▪︎ 1 × 5.5° vertical wedge mount (tilt bracket)

▪︎ All required mounting screws (included)

✖︎ Doorbell and OEM backplate/HomeBase are not included. Photos may show example setups for illustration.

Fit & Measurements

▪︎ Designed to provide a consistent 5.5° vertical tilt for the compatible Eufy footprints listed above

▪︎ Flip orientation to tilt down or up depending on your mounting height and desired framing

→ Please confirm you have adequate flat mounting area on your siding/trim before purchase.

Why You’d Use This Wedge

▪︎ Compensates siding incline: Helps correct the natural tilt of many siding profiles

▪︎ Better camera framing: Useful if the doorbell sits high and needs a slight downward aim

▪︎ Flexible orientation: Flip to tilt down or up depending on your install

▪︎ Clean, stable mount: Keeps the install neat while improving the viewing angle

Installation Notes

Basic tools required (e.g., screwdriver).

▪︎ Place the wedge between the mounting surface and the doorbell mounting setup.

▪︎ Choose the wedge orientation that gives the desired up/down tilt.

▪︎ Install using the included screws and weather-seal as appropriate for your environment.

If you’re unsure about fitment or need a different angle, message us with photos — we’ll help quickly.

Materials & Finish

♺ 3D-printed durable plastic for everyday outdoor use.

▪︎ New condition. Minor internal artifacts may be visible due to additive manufacturing (3D printing). External faces are designed to present cleanly once installed.

Color & Image Note

Actual color may vary slightly due to lighting and display calibration. Photos may show example setups; Eufy components shown are not included unless stated above.

Brand & Affiliation Disclaimer

This is an aftermarket product made by Hidden River Lab. It is not affiliated with, sponsored by, or endorsed by Eufy. Eufy® is a trademark of its respective owner. Brand names are used solely to indicate compatibility.

Intellectual Property Notice

The design, images, and listing text are intellectual property of Hidden River Lab. Purchase does not grant any license to copy, reproduce, manufacture, reverse-engineer, or commercially exploit the design in whole or in part.

Support

Not sure if you have the Eufy S220 or E8210 / T8210, or whether 5.5° is enough tilt? Message us with photos of your mounting area — we’ll confirm fitment and help quickly.